BP Solar 60 Watt Solar Panel BP SX60

BP Solar

The BP SX60U is no longer available.
Take a look at the BP 365U 65 Watt or
Unisolar US-64 64 Watt.

Call toll-free (877) 297-0014 for more information or to order.

universal frame BP Solar SX 60 60 Watt
Multi-Crystalline Solar Panel

BP Solar's SX series provides cost-effective photovoltaic power for general use, operating DC loads directly or, in an inverter-equipped system, AC loads.

With 60 watts of nominal maximum power, the SX 60 is well-suited to traditional applications of photovoltaics such as telecommunications, cathodic protection, remote villages and clinics, pumping, and land-based aids to navigation. Its 36 multicrystalline silicon solar cells charge batteries efficiently in virtually any climate.

The Universal Frame model we carry has a high-volume junction box and a very rugged frame. The junction box accepts cable or conduit. Optionally, this box may also be fitted with blocking and bypass diodes, an oversize terminal block that accepts conductors up to AWG #4; standard terminals accept up to AWG #10.

The raintight (IP54 Rated) junction box of the SX60U is 25 cubic inches and accepts PG13.5 or 1/2" nominal conduit or cable fittings. With its six-terminal connection block, it enables most system array connections (putting modules in series or parallel) to be made right in the junction box. The SX60 may be used in series for high-voltage arrays up to 1000V.

The junction box may be field-wired to provide 12V or 6V nominal output.

Quality and Safety

• Manufactured in ISO 9001 certified factories
• Listed by Underwriter's Laboratories for electrical and fire safety (Class C Fire Rating)
• Certified by TÜV Rheinland as Class II equipment for use in systems with voltage up to 1000 VDC
• Approved by Factory Mutual Research for application in NEC Class 1, Division 2, Groups C & D hazardous locations.
• Compliant with the requirements of IEC 61215, including:
  - repetitive cycling between -40°C and 85°C and 85% relative humidity.
  - a "hot-spot" test, which determines a modules ability to tolerate localized heating
  - static loading, front and back, of 2400 pascals (50 psf) front loading (e.g. snow) of 5400 pascals (113 psf)

The SX60U is approved by Factory Mutual Research for application in NEC Class 1, Division 2 FM, Groups C & D hazardous locations and approved for explosion resistance. This certification is required near gas and oil pipelines.

SX60 PDF Spec sheet

Model	Rating	Description	Price
BP SX60	60 Watts, 12V / 6V Nominal 16.5V Peak	Model: SX60U Type: Performance Multicrystalline Connection: High-volume junction box Frame: Aluminum with tempered glass - Rugged universal frame Peak Power: 60 watts, 55 watts warranted	The BP SX60U is no longer available. Take a look at the BP 365U 65 Watt or Unisolar US-64 64 Watt.