PV Powered PV35KW Commercial Grid-Tie Inverter
The
PV Powered PVP 35 kW is a single inverter solution for small commercial
installations.
This inverter combines the benefits of high reliability, low lifetime
cost, and leading efficiency into one easy-to-install system.
The 35 kW PV Powered commercial inverter features the same industry-leading reliability, efficiency, ease of installation, and lifetime maintainability as larger PV Powered™ commercial inverters. This model is sized to serve smaller PV system designs, or to provide the perfect fit to complete a larger PV system. In addition, the 35 kW and 50 kW models deliver the highest efficiency in their class and rival the efficiency of much larger inverters.
High reliability is enabled by a ground-up design for 20+ year operating life that features bus bar power connections, card cage circuit board design, and the widest temperature rating of any inverter in its class. The highly integrated system saves installers time and money by including load-rated AC & DC service disconnects, neutral-free installation, oversized bus bar landings and generous cable bending area. The 35 kW and 50 kW models have a 295 VDC minimum MPPT voltage that enables the stringing flexibility that is critical for smaller rooftop projects.
AE backs all its commercial inverters with an industry-leading 10-year warranty and an optional 20-year warranty, plus the most responsive service and support team in the business.
•
Designed for 20+ year operating life
•
Smart Air Management™
•
Low parts count reduces potential failure points
•
Card cage circuit board system minimizes electronic interconnections
Exceptional Installability
•
Bottom and side entry with generous bending area and oversized
bus bar landings
•
Large DC sub-combiner area with the industry's most flexible
fusing options
•
Full power output at 295 VDC enables more PV array design
options
•
Exterior mounting flanges for fast and easy anchoring with
no pre-drilling
Easy to Maintain
•
All maintenance and service via front access
•
Fast change circuit board system shortens service time
•
Load-rated AC and DC service disconnects
•
Dedicated monitoring section separate from AC and DC modules
PVP35KW ELECTRICAL SPECIFICATIONS
Continuous Power Output (kW) | 35 |
|
|
Peak Efficiency (%) | 96.6% | ||
Weighted CEC Efficiency (%) | 95% | ||
Maximum DC Input Voltage (VOC) | 600V | ||
DC Peak Power Tracking Range | 295V – 595V | ||
DC Imp Nominal Current | 125A | ||
AC Nominal Voltage-Field Configurable | 208V and 480V | ||
AC Operating Range | |||
208V | 183V - 228V | ||
480V | 422V - 528V | ||
AC Frequency Range | 59.3Hz - 60.5Hz | ||
AC Maximum Continuous Current | |||
208V | 100A | ||
480V | 43A | ||
Standby Losses | 33W | ||
Harmonic Distortion | <3% THD | ||
Power Factor | >.99 |
MECHANICAL SPECIFICATIONS
Enclosure | NEMA 4 |
Construction | Powder Coated Steel |
Mounting | Pad Mount |
Weight | 1200 lbs |
Cooling | Forced Convection |
Temperate Range |
-30C to
50C |
Isolation Transformer | Yes |
CERTIFICATIONS
IEEE 519, IEEE 929, IEEE 1547, CSA 107.1-1, FCC Class B